Send Message

E Flute Grinding Shaft Tungsten Carbide Corrugating Rolls

E Flute Grinding Shaft Tungsten Carbide Corrugating Rolls
Features Gallery Product Description Request A Quote
Material: 50CrMo Precision Forged Alloy Steel
Coating: 60-80μm American Praxair Super Hard 1342 Tungsten Cabide Powder
Width: 2800mm×Φ385/560mm
Heating Treatment: Intermediate Frequency Quenching
Hardness: >HRC58 After Hardening
Micro Hardness: HV1250-1400
Flute Type: E Flute 1.5mm
Warranty: 35million Linear Meters Or 1 Year, Whichever Comes First
Finishing: Ra <0.6μm
Refurbish: 3-4 Times
High Light:

Grinding Shaft Corrugating Rolls


E Flute Corrugating Rolls


50CrMo Corrugating Rolls

Basic Infomation
Place of Origin: Made in China
Brand Name: YH
Certification: ISO9001
Payment & Shipping Terms
Packaging Details: Wooden Boxes
Delivery Time: 60-90 days
Payment Terms: T/T
Supply Ability: 1500 sets per year
Product Description

Tungsten Carbide Corrugating Rolls Grinding Shaft Super Wear Resistant


Tungsten carbide corrugated roll
Tungsten carbide corrugated paper roll made of Meijia
production line
Corrugated board production line
The complete corrugated board production line includes the following machines: rolling mill stand, preheater, splicer, single facer, viaduct, multi-purpose preheater and gluing machine, double bread dough machine, slitting machine, slitting and stacking Machine waiting.
The raw paper roll is fed into the roll stand. After being heated by the preheater and adjusting the moisture, the base paper will enter the single-sided corrugator, corrugate from this, and bond with another base paper to become a single-sided corrugated paper. Then it is conveyed through the roof bridge, reheated by the multi-layer preheater, glued by the gluing machine, and connected by the double bread machine cutting machine. Then, continuous corrugated cardboard comes out.
After cutting and scoring through the slitting machine, and cutting horizontally through the edge trimming machine, corrugated cardboards of different sizes are produced. Finally, these corrugated cardboards of different sizes will be stacked, calculated and sent out by the stacker.
Heating method: using steam heating.
Flute Profile Height(mm) Pitch(mm) Flutes/300mm T.U.R
A UV 4.5-5.0 8.0-9.5 34±3 1.45-1.52
C UV 3.5-4.0 6.8-7.9 41±3 1.37-1.47
B UV 2.5-3.0 5.5-6.5 50±4 1.33-1.41
E UV 1.1-2.0 3.0-3.5 93±6 1.24-1.36
F UV 0.8-1.0 2.2-3.2 115±20 1.19-1.25
G UV 0.6-0.8 1.8-2.8 136±20 1.15-1.20
N UV 0.4-0.6 1.2-2.2 193±55 1.10-1.15
Others UV Customized Design Design Design
Advantange corrugated roll:
1. The coating is firmly combined with the substrate to ensure long-term use of the coating without falling off;
2. The hardness of the coating is high, the wear resistance is doubled, and the life is linearly extended;
3. The coating thickness is uniform and controllable, which can ensure the accuracy of the corrugated wheel;
4. The surface roughness before coating can reach ra0.3-0.5um. After grinding with a special diamond grinding wheel cutter, the surface roughness reaches and is higher than that of the electroplated hard chrome roller.
5. With UV-type corrugated design, it can effectively improve the hardness of the cardboard and reduce the amount of paste and the waste of core paper;
6. When the corrugated type is used, there will be abrasion in theory, and the paper output rate will remain unchanged for a long time;
7. Since the corrugating roller used this machine, the thickness of the cardboard produced remains unchanged, the printing is always smooth, and the quality of the cardboard and cartons is stably controlled;
8. Using special methods to remove the coating, the wheel blank can be reused;
9. The extension of the service life reduces the frequency of replacement, and also saves labor and material costs;

Precision index of corrugating rolls

Item Index
Gear teeth height limits of deviation ≤ 0.01mm
Addendum circle run out tolerance ≤ 0.02mm
Gear teeth width limits of deviations ≤ 0.015mm
Tooth profile limits of deviations ≤ 0.01mm
Gear lateral face counter shaft parallelism ≤ 0.01mm
Tip cylinder element linear ≤ 0.01mm
Gear teeth division limits of deviations ±10"
Smooth finish Ra<0.6µm


Recommended Products
Get in touch with us
Contact Person : Bonnie Li
Tel : +8618661680180
Characters Remaining(20/3000)